Beverage Manufacturing
Aftermarket Bottle Capping Solutions
- Alcoholic beverages include beer, wine, and liquor, while non-alcoholic beverages include milk, soda, juice, and water.
- These facilities also produce concentrates.
- These industries use traditional and modern techniques to meet consumer demands and environmental standards.
Key Processes Used in Beverage Production
Formulation of Liquid
Different Stages of Liquid Beverage Formulation
Component Storage
Raw materials for the liquid are transported to the plant using trucks, rails, or pipelines. These materials may either be treated immediately or stored for later use. Tanks are reserved for specific times, and bulk storage facilities are self-contained, clean, and sanitized.
End Product Storage
Beverages are usually stored for a long time after being made. This storage can occur as part of the beverage formulation or in a temporary holding facility before packaging. It is essential to closely monitor these storage containers to ensure that the final product is safe and consistent for consumers. This helps prevent spoilage and contamination, which can affect the quality of the beverage.
Mixing
During the production of each beverage, a mixing or blending process is used to create the final product. This process occurs in various locations, including mix plants, batch plants, kitchens, and laboratories. Mixing involves combining raw or blended components in vats, cauldrons (large storage containers), mixers, blenders, and tanks.
Aftermarket Bottle Capping Solutions – Packaging of the Liquid Products
Liquid beverages are typically packaged in plastic or glass bottles, aluminium cans, or waxed containers like milk cartons. Customers can request various forms and sizes to meet their demands. These containers are either prepared in-house or by an external vendor. The containers can be either blank for labeling after filling or labeled and ready for filling.
Depalletizer
Beverage containers are delivered to the plant via truck or rail and are stacked and palletized upon arrival. The first step in packaging is to remove the shrink wrap from each pallet or bulk bundle to prepare for individual handling and treatment. This helps ensure that the items can be safely managed andz processed.
A depalletizer, which can dispense each container mechanically or pneumatically, is used to accomplish this. The containers are then conveyed to the washing facility using air conveyor systems, inline bottles, and can lines.
Filler
The product is moved from the storage facility and poured into the container during the filler process. Even though this process is done at high speed, the liquid flow is typically under light pressure to ensure that each container is filled accurately.
The most common type of filler is the carousel filler, which contains multiple heads. Each head has a cylinder, plunger, and spring. The spring adjusts the plunger to distribute the correct amount of liquid as the carousel rotates. This allows for the creation of various product types and sizes at a single facility.
Closer/Capper/Seamer
After filling the containers with liquid, they are sealed with caps, crowns, or seals to prevent spills. The capping solutions are adjusted to fit the containers and ensure the closure is perfectly secured, even if there is any vibration.
Finally, the containers are sealed for the last time to ensure the product remains safe and secure.
Filled containers are transported from the filler room using conveyors. Since conveyors can quickly fill up, most facilities include overflow or accumulation conveyors to stack products before distributing them.
Labeler
Labels are usually applied to containers after the sealing process. Each container should be labeled individually, whether a can, bottle, plastic or wax carton. Rotating the container facilitates the labeling process. All sides, including the top and bottom, should be labeled.
Casing
Packaging individual containers involves placing them in a vessel that can hold up to 48 units. This vessel could be made of a simple plastic connector connecting separate units. Fiber or cardboard boxes/packages store six or more units. The entire process is timed using electronic, mechanical or a combination of both methods.
Palletizer
The role of a palletizer is to manage incoming cases and arrange them on pallets in an organized manner. It ensures that the cases are tightly packed and appropriately indexed, allowing the next level of cases to be added. As more cases accumulate on top, the pallet is deemed full.
Exim Engineering specializes in providing comprehensive services to the beverage industry. We understand the challenges and opportunities of this industry and are committed to improving every aspect of bottling lines.
Our solutions are designed to improve performance, minimize downtime, and increase revenue. We offer a range of products that meet the industry’s strict standards for hygiene, precision, and automation, including conveying systems, bearings, bottle capping solutions, and food grade lubricants.
Aftermarket Bottle Capping Solutions for the Beverage & Juice Bottling Industry
Bearings
Featured Products
SIEMENS SKD62UA
The SKD62UA Siemens Advanced Type Actuator is designed for precise control with a 0-10 VDC input and operates on 24VAC power. It is compatible with the Flowrite Valve Series, offering reliable performance for HVAC and fluid control applications.
Buy SEW Eurodrive BGE 1.5 - Motor Brake Rectifier
SEW EURODRIVE BGE 1.5 – Motor Brake Rectifier
One-way motor brake rectifier with electronic switching
AC: 150-500 V
Holding Current: 1.5A
Compact 5-Port Solenoid Valve/Plug-in Type JSY1000/3000/5000
Power consumption: 0.1 W (With power-saving circuit), 0.4 W (Standard) ・Connector type manifold ・A 4-position dual 3-port valve is available
Rexnord 1873TAB SideGrip™ Side-flexing
The LF1873TAB SideGrip™ Chain features a 3.75-inch width and is constructed with a stainless steel base chain and top plates.
Material: Tan Low Friction
Width: 3.75in
Pitch: 1.5in
SMC VQ4201-5W1 valve
VQ valves are perfect for applications demanding high-speed performance, frequent operation, consistent response times, and extended service life.
VQ4000 – VALVE
SOL – 4/5-PORT
CEWDM3610T
3HP, 3450RPM, 3PH, 60HZ, 182TC, 3532M, TEFC, F1
Catalog Number – CEWDM3610T
Enclosure – TEFC
Frame – 182TC
Frame Material – Steel
Frequency – 60.00 Hz
Rexnord 1873TAB SideGrip™ Side-flexing, Material
The LF1873TAB is a 3.75-inch wide SideGrip™ Chain featuring a durable stainless steel base chain and top plates. The top plates are molded in tan low-friction material for smooth operation, and the chain is supplied with black neoprene jaw-shaped grippers rated at 40 Shore A, ensuring excellent grip and long-lasting performance.
Jason LH100US OPEN END URETHANE STEEL
By utilizing the thermoplastic properties of open-end belts, endless belts can be custom-produced to any desired length through welding. Vee endless spliced belts are ideal for conveying applications, especially in scenarios where precise indexing and/or positive drive are essential for optimal performance.
AVENTICS™ Mini cylinder, Series MNI 0822233001
Configurations available as single/through piston rod, elastic/adjusted cushioning, with/ without magnetic detection, non-rotating piston rod, ATEX.
Inductive sensor NBN4-F25-E8-V1
Direct mounting on standard actuators
Small construction with sturdy plastic housing of protection class IP 67
LED for power on
M12 male connector
22B-D4P0N104 - Allen Bradley
This Allen-Bradley PowerFlex 40 Drive is a 2 HP variable frequency drive (VFD) with a voltage rating of 380-480V and an output rating of 4.0 Amps. It features a fixed keypad and does not include a filter.
SEW SA67 DRN90S4 SO #87.7883681101.0001.16.90 1762/65 RPM 26.93/infinite 1.5 HP 60 Hz Helical Worm Gearmotor
Brand – SEW Eurodrive
SKU- 6424520
PowerFlex 70 20AD065A0AYNANC0 Allen Bradley
The Allen-Bradley 20AD065A0AYNAC0 is an adjustable frequency AC drive from Rockwell Automation’s PowerFlex 70 series. It includes a brake IGBT but does not have an internal brake resistor.
SEW K37 Helical Bevel Gearmotor
DRN90S4/BE2HR/TF/EK8S
SO #87.7953158301.0001.21.50 1762/103
RPM 17.15/Infinite 60 Hz 230/460 1.5 HP Helical Bevel Gearmotor
MODEL K37 DRN90S4/BE2HR/TF/EK8S
SO #87.7953158301.0001.
SEW Eurodrive K47 DRN90S4/BE2HR/TF Helical-bevel gearmotor
Model: K47 DRN90S4/BE2HR/TF
Speed 50Hz [r/min]: 1455 / 170
Speed 60Hz [r/min]: 1762 / 206
Total ratio [i]: 8.56 / infinite
Ma max [Nm]: 270
Ta max [lb-in]: 2390
Small Bore Shock Absorbers
Leveraging the latest advancements in energy absorption technology, Enidine provides the world’s most extensive range of Industrial Shock Absorbers and Rate Controls.
Applications:
• Automotive
• Conveyor Systems
• Plastic Bottle Manufacturing
• Packaging Machinery
• Robotics
Large Bore Shock Absorbers
Enidine’s Heavy Industry solutions are engineered to safeguard high-value assets from damage caused by impacts, emergency runaway conditions, and seismic activity.
Applications:
• Automated Storage and Retrieval
• Steel Manufacturing
• Overhead Cranes
• Oil and Gas
• Hydroelectric
• Robotics
Fluid Viscous Dampers
ITT Enidine Fluid Viscous Dampers offer superior protection against shock and vibration for buildings, bridges, stadiums, and more—from low-rise structures to towering skyscrapers.
Applications: • Seismic Structural In-Frame • Base Isolation • Seismic Bridge • Tuned Mass Damping • Floor Isolation Systems • Storage Rack System • Stadium Seating Damping Systems • Hydro-Electric Generator Damping • Electrical Infrastructure Isolation • Electric Wind Mills • Chimney/Stack Damping
Vibration Isolation and Damping
ITT Enidine Fluid Viscous Dampers offer superior protection against shock and vibration for buildings, bridges, stadiums, and more—from low-rise structures to towering skyscrapers.
Applications: • Seismic Structural In-Frame • Base Isolation • Seismic Bridge • Tuned Mass Damping • Floor Isolation Systems • Storage Rack System • Stadium Seating Damping Systems • Hydro-Electric Generator Damping • Electrical Infrastructure Isolation • Electric Wind Mills • Chimney/Stack Damping